SEE SPEC SHEET

$340.00

SEE SPEC SHEET

$309.00

SEE SPEC SHEET

$339.00

Features full-time torque-sensing, torque-biasing Responds immediately to variable driving conditions Provides better traction, acceleration and handling than the factory open differential

$598.00

Torsen T-2 type differential Features full-time torque-sensing, torque-biasing Responds immediately to variable driving conditions Provides better traction, acceleration and handling than the factory open differential

$720.00

Fits Focus 2.0L Zetec, built after October, 2000 with MTX-75 transmission Update your Focus final drive ratio from 3.82 to 4.06 Professional installation may be required

$139.00

Centerforce “Dual Friction” clutch system improves clamping force by more than 90% Improves clutch feel while maintaining easy pedal effort Includes clutch disc and pressure plate Fits 2000-04 2.0L Zetec Focus ZX3/4/5, not applicable to SVT

$210.00

Fits 2000-07 Focus ZX3/4/5 Allows easy camber adjustment Features anti-sway bar mounts May be required to mount rear stabilizer bar (M-5400-Z3) on 2005-07 Focus

$215.00

Fits 2000-05 Focus with modifications to the fuel filler neck plastic box 

2001 Special Edition Mustang Aluminum Fuel Door Original equipment on 2001 Special Edition Mustang Manufactured by the OEM supplier, not a reproduction part Fits 1999-04 Mustang Fits 1997-03 F-150 with round fuel door Fits 2000-05 Focus with modifications to the fuel filler neck plastic box 6.250" diameter

$75.00

2000-05 Focus except wagon
Lowers vehicle approximately 1.5" Gives a more aggressive looking stance as well as increased handling dynamics May cause slightly harsher ride compared to stock springs NOTE: Some factory fasteners are one-time use. Please reference  Ford service manual for reuse information and correct torque  specifications.

$199.00

2006-07 Focus except wagon Lowers vehicle approximately 1.5" Gives a more aggressive looking stance as well as increased handling dynamics May cause slightly harsher ride compared to stock springs NOTE: Some factory fasteners are one-time use. Please reference  Ford service manual for reuse information and correct torque specifications.

$199.00

Improves handling Fits 2006-07 Focus except wagon Lowers vehicle approximately 1.5" Includes front and rear springs

$195.00

Original equipment on SVT Focus Upgrades your stock Focus suspension to SVT Focus Improved handling characteristics without ride degradation Reduced ride height approximately .5"

$280.00

2006-08 Focus except wagon Tuned for track Dynamic dampers - same manufacturer as those on the Mustang FR500C race car Kit includes front struts and rear shocks

$499.00

2000-05 Focus except wagon Tuned for track Dynamic dampers - same manufacturer as those on the Mustang FR500C race car Kit includes front struts and rear shocks

$499.00

Fits 2000-05 Focus except wagon  Improves handling Includes front dampers with mounts, spring seats and rear dampers

$180.00

$180.00

Derived from Focus RS, this kit fits 2000-04 ZX3/4/5 manual transmission only Requires factory ABS Requires RS body kit or equivalent to provide adequate tire/wheel  assembly clearance Kit requires calipers be purchased separately Caliper kit M-2300-B requires minimum 18" wheel; M-2320-F,  M-2320-AF, and M-2320-C require minimum 17" wheel Kit includes springs, dampers, front knuckles, front hubs, rear  spindles, half shaft assemblies, 12.75" front rotors, 11" rear rotors, rear calipers,  mounting hardware and instructions Front hubs, front knuckles and rear spindles have increased  stiffness and bearing size over production Kit increases stopping power approximately 10% with Cobra type calipers, 15% with RS/Brembo® calipers

$2500.00
truck ship

Similar to M-2300-ZX3 except different sized rotors for OEM 15" wheels Complete kit to put larger disc brakes on 2000-04 ZX3/4/5 Focus Includes 280 x 25 mm vented front rotors and 280 mm solid rear rotors Includes all calipers and mounting hardware Includes front and rear knuckles

$899.00
truck ship

Complete kit to put SVT Focus brakes on 2000-04 ZX3/4/5 Focus Includes 300 mm front rotors and 280 mm rear rotors Includes all calipers and mounting hardware Includes front and rear knuckles

$945.00
truck ship

CNC’d for flow improvement and includes 3-angle valve job Cast from prime 319 aluminum Assembled with 21-4N stainless steel intake and exhaust valves, production valve springs and retainers (tappets, cams and cam seals not  included) Intake valve diameter: 33 mm, Exhaust valve diameter: 30 mm Chamber volume 47.7 cc (nominal) Bare head weighs 28.3 lbs. Production intake and exhaust manifolds bolt on TYPICAL AIRFLOW (@ 28" OF H20 DEPRESSION) AS DELIVERED

$1079.00

High-Flow Duratec cylinder head casting from 2.3L Duratec engine CNC porting increases flow approximately 15% on intake and exhaust Accepts stock valvetrain Fits 2003-06 Focus with 2.0L/2.3L Duratec engine Valves, springs and retainers installed; no cams

$879.00

Springs will work with most cams up to .450" lift Works with most high lift aftermarket Zetec cams Can be changed on vehicle, NO MACHINING REQUIRED Includes valve springs and retainers

$235.00

Radical Street/Strip profile Manual transmission with headers CNC ported head with port matched intake Increased compression recommended: 10.5:1-12.0:1 Excellent power naturally aspirated PLUS super nitrous cam or with supercharger RPM range: 3,000-8,000

$345.00

Intake Valve Service replacement for the CNC’d Ford Racing Zetec cylinder head M-6049-ZX3P 33  m diameter

Swirl polished, 21.4N premium stainless steel intake and exhaust valves for high-performance cylinder head applications. Requires cylinder head to be modified to accept bigger valves; will not work in production heads.

$12.00

Exhaust Valve Service replacement for the CNC’d Ford Racing Zetec cylinder head M-6049-ZX3P 30 mm diameter 

Swirl polished, 21.4N premium stainless steel intake and exhaust valves for high-performance cylinder head applications. Requires cylinder head to be modified to accept bigger valves; will not work in production heads.

$12.00

Fits all 2000-04 Focus ZX3 and ZX5 Complete with driving lights, lower grill insert, lower valance, side marker lights and SVT horn Must be painted to match color of car Original equipment on the 2003 SVT Focus

$375.00
oversize shipping

Fits 2000-05 Focus ZX3 and ZX5 Complete with honeycomb insert Must be painted to match color of car Original equipment on the 2003 SVT Focus

$300.00
oversize shipping

Designed to be used with performance manifold M-9424-ZX3R.

$399.00

$719.00

$125.00

$110.00

$129.00

$150.00