1979-93 MUSTANG/CAPRI  28-spline Differential This kit includes 1 pair of 9" x 1-3/4" brake  drums with 5 mounting holes on a 4.5" diameter circle—and 1 pair of 28-spline axle shafts with  mating 5-lug bolt pattern. Permits owners of 979-93 Mustang/Capri vehicles with 9" rear  brakes and 8.8" rear axle with 28-spline differential to fit 5-hole, 4.5" diameter bolt  circle wheels to them.

[JACPurchaseButton-Description]

Fits 2005-08 Mustang GT Kit will upgrade the front brakes to 2007-08 SVT Mustang 14" rotors and 4-piston calipers Includes 2007 SVT Mustang rear pads for use in stock Mustang GT rear calipers Includes Goodridge® DOT four-piece hose kit and attaching parts Requires 18" M-1007-S1895, M-1007-S1895B wheel or equivalent for caliper clearance

[JACPurchaseButton-Description]

1987-93 MUSTANG

This kit permits owners of 1987-93 Mustang GTs  and LXs with V-8 to upgrade their vehicle braking system to 1993  Cobra “R”/1994 Cobra specs. The kit features massive 13.0" front and  11.65" rear rotors, plus spindles, axle shafts, hubs, calipers, mounting  brackets, Cobra brake booster and master cylinder, adjustable  proportioning valve, hoses, tubes, attaching hardware, instructions and more. Installation is a virtual bolt-on, requiring  only one flared connection. Requires use of 17" x 8" wheels (not included in  kit) with 5-hole, 4.5" diameter mounting pattern and 5.75" backspacing.  Rear inner fender lips should be “rolled” for tire clearance. Some  vehicles may also require front fender wheel well modifications, depending on  tire size and ride height. 

NOTE: Does not fit Mustang 8.8" axle.

This rear disc brake kit may be low buck, but it  really works! Kit includes 11" rotors, calipers, mounting brackets and attaching  hardware. The rotors have the popular 5-hole, 4.5" diameter passenger car bolt pattern.  Caliper mounting brackets fit the popular 8.8" Truck/9" Late Ford axle housings with 2" x 3.56"  pattern and big 3.15" diameter bearing. This kit is designed for vehicle installations  with a 2.5" brake gap (housing flange-to-axle shaft flange). NOTE: Hoses, tubes, parking brake cables and  wheels are NOT included in this kit. Additional parts and machining may be required.  For more information, call the Techline at (800) FORD788.

[JACPurchaseButton-Description]

Used to install Mustang Cobra, Mach 1, or  Special Edition rear calipers on a 1994-04 Mustang GT Kit includes production 11.65" rotors, caliper  mounting brackets, moan braces, dust shields and dust shield bolts

[JACPurchaseButton-Description]

Original equipment on 2000 Cobra “R” Kit includes Brembo® 4-piston calipers, brake  lines, hardware and “upgraded” slotted rotors This kit can be used to upgrade the front brakes on 1994-04 GT and 1994-04 Cobra May require larger wheels like  M-1007-R189/R189C/F500/F500C NOTE: 1994-95 GT requires 1994 Cobra master  cylinder

[JACPurchaseButton-Description]

These kits will upgrade the front brakes to  1994-04 Cobra 13" rotors and calipers Use with stock rear disk brakes Includes hoses and attaching parts Requires 17" wheels such as M-1007-C58,  M-1007-C178, M-1007-R58 or equivalent

[JACPurchaseButton-Description]

These kits will upgrade the front brakes to  1994-04 Cobra 13" rotors and calipers Use with stock rear disk brakes Includes hoses and attaching parts Requires 17" wheels such as M-1007-C58,  M-1007-C178, M-1007-R58 or equivalent

[JACPurchaseButton-Description]

Designed as an upgrade for M-2300-K brake kits.  This kit includes 2 improved strength brake hoses and 2 Cobra 13" brake  rotors. Can also be used to upgrade the braking performance of 1994-98 Mustang  Cobras. Highly recommended for the above vehicles used in open track events.

[JACPurchaseButton-Description]

Same calipers as used on the 2001 Special Edition Mustang Bullitt. Similar to 2001 Mustang Cobra except painted red with running horse in place of Cobra logo Fits 1994-04 Mustang with M-2300-Q/R upgrade kit and 1987-93 Mustangs with M-2300-K brake kit Kit includes left and right front calipers  and brake pads

[JACPurchaseButton-Description]

[JACPurchaseButton-Description]

Includes 2 coarse-thread banjo bolts and 4 washers Used to install front calipers M-2320-A and M-2320-AF

[JACPurchaseButton-Description]

Replacement front calipers and brake pads for 1994-04 Mustang Cobra with 13" rotors Same calipers and pads used in the M-2300-K SHD brake kit for 1987-93 Mustangs

Replacement rear calipers and brake pads for 1994-04 Mustang Cobra with 11.65" rotors Same calipers and pads used in the M-2300-K SHD brake kit for 1987-93 Mustang GT

[JACPurchaseButton-Description]

[JACPurchaseButton-Description]

[JACPurchaseButton-Description]

[JACPurchaseButton-Description]

Fits Brake Drum M-1126-B 11" x 2.25" brakes for late model 9" axle housing 3.150" center pilot hole .381 attaching bolt holes 3.56" x 2" attaching bolt pattern Kit includes 2 new assembled backing plates with  brake shoes, wheel cylinder, self-adjuster, parking  brake and springs Sold in pairs

[JACPurchaseButton-Description]

Brake drum for backing plate kit M-2209-B 5 on 4.5" bolt circle Axle center pilot hole 2.780" Sold individually

[JACPurchaseButton-Description]

Compact, lightweight (.5 lb.) aluminum brake proportioning valve. “Kneepoint” is adjustable  from 100 to 1000 psi. Inlet and outlet ports have  1/8"- 27 NPT threads for maximum installation  flexibility.

[JACPurchaseButton-Description]

[JACPurchaseButton-Description]