This crossmember is a “double hump” design that simplifies  installation of dual exhaust systems on Fox vehicles. The outer tubes are not welded to the  center support, and thus can be adjusted to fit most engine/transmission combinations. It  directly fits all Fox vehicles with a 4.5" dimension between the crossmember mounting brackets. It  can be used on Fox vehicles with a 2.75" mounting dimension by relocating the  brackets. It does not fit 1982 and later Continental or 1984 and later Mark VII, because they have a  unique crossmember.

Stamped Steel 164-Tooth 50 oz.-in. Fits 1981-01 5.0L  engine with AOD or C-4 trans. with large bellhousing. Will not Fit C-6. 

Stamped Steel 164-Tooth 28 oz.-in. Fits  289/302/351W,C,M with large bellhousing C-4 trans. and AOD.

Stamped Steel 164-Tooth 0 Balance Fits 4.6L/5.4L 8-bolt  crankshaft with HP 11.25" 4R70W torque converter.

Stamped Steel 157-Tooth 50 oz.-in. Fits 1981-01 5.0L  with small bellhousing C-4 trans. 13-1/4" diameter/ 10-1/2" bolt circle.

Fits 31 spline output shafts Uses 1330 U-joints Use with M-7003-R58C, M-7003-R58W, M-7003-R58H, M-7003-F, M-7003-G, M-7003-H and production T-45, C-6 and 3650 transmissions

For replacement use or custom driveshaft construction Fits C-4, AOD and T-5 transmissions Designed for 1330 U-joint

7/16"-20 x .875" bolts Set of 10 bolts Can also be used for automatic transmission flywheels

Fits 4.6L modular engines with automatic transmission flywheels M10x1x20.5 bolt Package of 6

Unique patented “stacked-plate” design offers 35% improvement in efficiency over fin-and-tube coolers. The .75" x 7.25" x 11" unit weighs only 2.5 lbs., but has a full 18,000 lbs. GVW rating. The self-regulating design feature bypasses cold transmission fluid automatically (without thermostats or valves) until its viscosity decreases and allows fluid to flow through the main body of the cooler. SAE thread fittings.

E40D/4R100 Deep Sump Cast aluminum transmission pan with cooling fins and Ford Racing logo cast in the bottom Pan holds approximately 2 quarts additional ATF Kit includes mounting hardware Filter and pan gasket not included