Ford Racing
Parts - 2005 - 2008 Ford Mustang Performance Parts
|
|
|
 |
2007-09 SVT MUSTANG WHEEL
Fits 2005-08 Mustang GT and the 2007-08 SVT Mustang 5-lug, 4.50" bolt circle
7.125" backspacing 45 mm offset 18" x 9.5" wide Includes SVT center cap Same as production
2007-08 SVT Mustang |
M-1007-S1895*
$209.00
|
|
 |
2005-10 BLACK MUSTANG WHEEL
Fits 2005-08 Mustang GT Black painted finish 5-lug 4.5" bolt circle 6.82" backspacing
50 mm offset 18" x 8.5" wide Includes Mustang center cap |
M-1007-S1885B*
$155.00
|
|
 |
2005-10 MUSTANG BULLITT SPECIAL EDITION WHEEL BLACK FINISH
Fits 2005-08 Mustang GT 5-Lug 4.5" bolt circle 6.295" backspacing 45 mm offset
17" x 8" wide Includes center cap |
M-1007-T178B*
$145.00
|
|
 |
2005-10 SILVER MUSTANG GT WHEEL
Fits 2005-08 Mustang GT 5-Lug 4.5" bolt circle 6.295" backspacing 45 mm offset
17" x 8" wide Includes center cap |
M-1007-T178S*
$130.00
|
|
 |
MUSTANG GT INTAKE SHROUD 05-10
Original equipment on 200-08 Mustang GT Fits all 2005 and up Mustang GT's with 3-valve 4.6L engine
May require 2007 Mustang throttle body studs (W712289 S437) and nuts (W520411 S437)
from Ford Dealer Will not fit with Ford Racing strut tower brace M-20201-S197
|
M-6949-3V
$89.00
|
|
 |
2005-11 MUSTANG GT AXLE KIT
2005-08 Mustang GT 8.8 axle assembly 31 spline axles and Trac-Lok differential
3.55 gear ratio Includes axle shafts
|
M-4001-A355* $999.00
|
|
 |
2005-09 MUSTANG GT EXHAUST KIT
T-304 stainless construction Louder, “throatier” exhaust note 49 state
drive-by noise legal (not legal in CA) Includes mufflers with Ford Racing embossed
3.5" exhaust tips
|
M-5230-5GT* $549.95
|
|
 |
2005-09 MUSTANG GT MUFFLER SET
409 stainless body with highly polished 4.0" diameter tips Louder, throatier
exhaust note 50-States drive-by noise legal (E.O. #D-598) NOTE: 409 stainless
exhaust material is titanium stabilized ferritic stainless steel. 409 stainless is used in
applications where appearance is a secondary consideration to mechanical properties and corrosion
resistance and where some weldability is required. An example of 409 stainless usage is catalytic converter assemblies. 409
stainless has excellent forming characteristics and is rust-through resistant. A surface
rust will form in most instances. This rust retards further corrosion.
|
M-5230-GTA $460.00
ONLY 2 LEFT IN STOCK!
|
|
 |
2005-10 MUSTANG GT X-PIPE
T-409 stainless steel X-pipe Converts your factory H-pipe to a more efficient X-pipe
Requires cutting of factory exhaust for installation Clamp-on installation—does not require welding!
|
M-5251-R*
$125.00
|
|
 |
COATED 3-VALVE CAM COVERS 4.6/5.4L
Powdercoated for chrome appearance Fits all 2005-10 3-valve 4.6/5.4L engines
Powdercoated finish
|
M-6582-C543V
$359.00
pair
|
|
 |
COATED 3-VALVE CAM COVERS 4.6/5.4L
Blue Fits all 2005-10 3-valve 4.6/5.4L engines Powdercoated finish
|
M-6582-3VB
$249.00
pair
|
|
 |
COATED 3-VALVE CAM COVERS 4.6/5.4L
Black Wrinkle Fits all 2005-10 3-valve 4.6/5.4L engines Powdercoated finish
|
M-6582-3VBLK
$249.00
pair
|
|
 |
MODULAR 3-VALVE HEAT RANGE ZERO SPARK PLUG
For use in engines with higher than stock cylinder combustion pressures
Unique design is proprietary to Ford 3-valve engines Only available through Ford
Racing One heat range colder than the stock Mustang GT plug Two heat ranges colder than the stock
5.4L truck 3-valve engine Sold in engine sets of 8
|
M-12405-3V0*
$92.75
set of 8
|
|
 |
MUSTANG GT DUAL FUEL PUMP KIT
Fits 2005-10 Mustang GT Includes harness, dual fuel pumps, drop-in housing
and fuel pump driver module from the 2007-08 SVT Mustang Includes all installation
hardware Highly recommended for any application making over 400 hp Same fuel pump kit
as used in the Mustang GT 500 hp supercharger kit
|
M-9407-GT05
$700.00
|
|
 |
MUSTANG GT 14 BRAKE UPGRADE KIT
Fits 2005-11 Mustang GT Kit will upgrade the front brakes to 2007-10 SVT Mustang 14" rotors and 4-piston calipers
Includes 2007 SVT Mustang rear pads for use in stock Mustang GT rear calipers
Includes Goodridge® DOT four-piece hose kit and attaching parts Requires 18"
M-1007-S1895, M-1007-S1895B wheel or equivalent for caliper clearance
|
M-2300-S*
$1339.00
|
|
 |
2007-08 SVT MUSTANG REAR LOWER CONTROL ARMS
Fits 2005-08 Mustang Original equipment on 2007-08 SVT Mustang Increased bushing durometer and stiffness
for higher horsepower applications NOTE: Some factory fasteners are one-time
use. Please reference Ford service manual for reuse information and correct torque
specifications.
|
M-5538-A
$118.00
|
|
 |
2007-08 SVT MUSTANG FRONT LOWER CONTROL ARM KIT
Fits 2005-08 Mustangs Original equipment on 2007-08 SVT Mustang Increased strength ball joints
Kit contains 1 RH and 1 LH lower control arm assembly NOTE: Some factory fasteners are one-time
use. Please reference Ford service manual for reuse information and correct torque
specifications.
|
M-3075-E
$229.00
|
|
 |
2005-10 MUSTANG FRONT LOWER A-ARM BRACE
Fits 2005-08 Mustang GT coupe Original equipment on convertible and 2007 SVT Mustang
Increases chassis stiffness
|
M-5025-A
$55.00
|
|
 |
MUSTANG FR500C REAR UPPER CONTROL ARM BUSHINGS
Fits 2005-08 Mustang GT rear suspension Service replacement for the Mustang FR500C race car
Includes bushings and sleeve for upper rear control arm Increased durometer
bushing for precise handling and control NOTE: Some factory fasteners are one-time use. Please reference
Ford service manual for reuse information and correct torque specifications.
|
M-5638-R $25.00
|
|
 |
2005-10 MUSTANG GT AND 2007-09 SVT MUSTANG TWO-PIECE DRIVESHAFT LOOP KIT
Bolts to floor pan 2005-08 Mustang GT and 2007-08 SVT Mustang Must drill
holes for installation Zinc plated Includes hardware Includes front and rear loops
for production two-piece driveshaft
|
M-5478-S197B
$105.00
|
|
 |
2005-08 MUSTANG C-PILLAR LOUVERS
Fits 2005-08 Mustangs Urethane construction Primed for paint, MUST PAINT TO MATCH
Comes with installation instructions Requires no drilling Use with M-2784-M to make
your Mustang like the FR500!
|
M-1784-MS
$174.00
|
|
 |
MUSTANG FUEL FILL DOOR
Improve the appearance of your 2005-09 Mustang Brushed aluminum finish Billet aircraft styling
Easy installation
|
M-2301-5M
$87.00
|
|
 |
2007-08 SVT MUSTANG COBRA FENDER EMBLEMS
Original equipment on 2007-08 SVT Mustang Includes right and left side emblems
4.25" tall by 2.50" wide
|
M-1447-C
$69.00
|
|
 |
FORD GT COOLANT OVERFLOW CAP
Ford GT coolant overflow cap with billet cover “GT” logo machined in cap
surface Fits both coolant overflow and intercooler reservoir
|
M-8006-GT
$65.00
|
|
|
BILLET PAINTED OIL FILL CAP COVER
FOR 4.6/5.4/6.8L
Fits all years modular engine Installs over factory plastic oil fill cap (not
included) Features Ford Racing logo painted in blue and red Clear coated
|
M-6766-MP46
$47.00
|
|
 |
2005-09 MUSTANG
LIGHTED FORD RACING
SILL PLATES
Fits 2005-08 Mustangs Improves appearance and protects vehicle entry area Black with brushed stainless steel
insert with “Ford Racing” logo Ford illuminates blue, Racing illuminates red
Kit includes two sill plates, installation tape and instructions |
M-13208-LFR
$250.00
Pair
|
|
| *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part.
|
|
|
|
